The operation of the 555 timer revolves well-nigh the ternion resistors that form a voltage rail-splitter crossways the power supply, and the two comparators connected to this voltage divider. The IC is quiescent so long as the trigger stimulation (pin 2) carcass at +VCC and the threshhold input (pin 6) is at ground. Assume the fix input (pin 4) is also at +VCC and therefore inactive, and that the control voltage input (pin 5) is unconnected. Under these conditions, the output (pin 3) is at ground! and the release junction transistor (pin 7) is turned on, thus grounding whatever is connected to this pin. The three resistors in the voltage divider all eat up the same value (5K in the bipolar version of this IC), so the comparator reference voltages are 1/3 and 2/3 of the supply voltage, whatever that may be. The control voltage input at pin 5 can directly mold this...If you want to get a full essay, order it on our website: OrderEssay.net
If you want to get a full information about our service, visit our page: write my essay
No comments:
Post a Comment